vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Engine, Check for Leaks, (CO Content in Cooling System) > < Attaching Parts - Cylinder Head, Remove and Install (Z16XEP)

Replace engine venting pipe

  Remove

1.   Open bonnet
2.   Remove air cleaner housing (4) with air intake pipe (2)
•   Disconnect intake air temperature wiring harness plug (3)
•   Unscrew bolt (1)
•   Release clamp
•   Detach air intake pipe
Object Number: 3446321  Size: DEFAULT


3.   Unclip wiring trough from cylinder head cover
4.   Detach engine vent pipe (1) from cylinder head cover (3)
•   Unlatch fuse clamp (2)
Object Number: 2412797  Size: DEFAULT


5.   Detach wiring harness bracket (2) from intake manifold
•   Unscrew 3 bolts
6.   Detach engine vent pipe (1) from intake manifold
•   Unscrew 2x bolts (3)
•   Remove seal ring
Object Number: 2412859  Size: DEFAULT


  Install

7.   Attach engine vent pipe to intake manifold
•   Insert new seal ring
•   Tighten 2x bolts
8.   Attach wiring harness bracket to intake manifold
•   Tighten 3x bolts
9.   Clip wiring harness to cylinder head cover
10.   Attach engine vent pipe to cylinder head cover
•   Ensure correct fitting
11.   Install air cleaner housing with air intake hose
•   Disconnect intake air temperature sensor wiring harness plug
•   Clip in tank vent hose
•   Tighten fastening bolt
•   Fasten clamp 3.5 Nm
12.   Close bonnet

Engine, Check for Leaks, (CO Content in Cooling System) > < Attaching Parts - Cylinder Head, Remove and Install (Z16XEP)