Replace front toothed belt cover (lower)
Remove
2. |
Remove bolt (1) and remove top front toothed belt cover from
rear toothed belt cover
|
|
|
3. |
Remove lower engine splash guard
|
4. |
Tension ribbed V-belt tensioner (clockwise)
• |
Lock using suitable drift
|
|
5. |
Remove bolt (1) and remove ribbed V-belt tensioner
• |
Remove from compressor support
|
|
|
|
6. |
Remove torsional vibration damper
• |
Counterhold at toothed belt drive gear fastening bolt
|
|
7. |
Remove bolt (1)
• |
Detach lower section of toothed belt cover from rear toothed
belt cover
|
|
|
|
Install
8. |
Attach lower section of toothed belt cover to rear toothed belt
cover 6 Nm
|
9. |
Attach torsional vibration damper to toothed belt drive gear
20 Nm
• |
Counterhold at toothed belt drive gear fastening bolt
|
|
10. |
Attach ribbed V-belt tensioner to compressor support 25 Nm
|
11. |
Tension ribbed V-belt tensioner (clockwise) and remove fixing
rod.
|
12. |
Install lower engine splash guard
|
13. |
Attach top front toothed belt cover to rear toothed belt cover
6Nm
|
14. |
Install ribbed V-belt
|
|