vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Oil Pump, Remove and Install > < Oil Pan, Remove and Install

Oil Dipstick Guide Tube, remove and Install

  Remove

1.   Open bonnet
2.   Disconnect battery
•   Detach earth connection from earth terminal
Slacken nut
3.   Remove oil dipstick guide tube (2)
•   Unscrew bolt (1)
•   Remove oil dipstick
Object Number: 8230998  Size: DEFAULT


4.   Raise vehicle by its full height
5.   Place collecting basin underneath.
Note:   If the engine oil level is at maximum, some oil may emerge when drawing out the oil dipstick guide tube
6.   Take out oil dipstick guide tube

  Install

7.   Insert oil dipstick guide tube
•   Use new gasket
8.   Lower vehicle by its full height
9.   Attach dipstick guide tube
•   Tighten bolt 8 Nm
•   Insert oil dipstick
10.   Connect battery
•   Attach ground connection to ground terminal
Tighten nut
11.   Top up engine oil
12.   Program volatile memories
13.   Close bonnet

Oil Pump, Remove and Install > < Oil Pan, Remove and Install