Replace oxygen sensor
Remove
2. |
Disconnect battery
• |
Detach earth connection from earth terminal
|
|
3. |
Raise vehicle by its full height
|
4. |
Detach the lower engine cover and right engine splash guard
|
5. |
Detach oxygen sensor wiring harness plug (1)
|
6. |
Remove oxygen sensor (2)
|
|
|
Install
7. |
Install oxygen sensor
• |
Coat thread of oxygen sensor with assembly paste (white)
Note: New oxygen
sensors are already pre-treated
|
• |
Tighten oxygen sensor 40 Nm
|
|
8. |
Connect oxygen sensor wiring harness plug
|
9. |
Install lower engine cover and right engine splash guard
|
10. |
Lower vehicle by its full height
|
11. |
Connect battery
• |
Attach ground connection to ground terminal
|
|
12. |
Program volatile memories
|
13. |
Programming the oxygen sensor with Tech 2
|
|