Replace pre-heating system control unit
Remove
2. |
Disconnect battery
• |
Detach ground connection from ground terminal
|
|
3. |
Remove battery
• |
Detach positive terminal (3) from positive pole
|
|
|
|
4. |
Remove pre-glow system control unit (1)
• |
Pull pre-heating system control unit out of bracket in
direction of arrow
|
• |
Disconnect wiring harness connector.
|
|
|
|
Install
5. |
Install pre-glow system control unit
• |
Fix wiring harness plug
|
• |
Insert pre-heating system control unit into bracket
|
|
6. |
Install battery
• |
Attach positive connection to positive terminal
|
|
7. |
Connect battery
• |
Attach ground connection to ground terminal
|
|
8. |
Program volatile memories
|
|