|
Test
|
Work Order Description
|
Nominal Value
|
|
T001
|
Check: Vacuum Supply System
|
- Ignition OFF
- Disconnect vacuum hose from following component:
Vacuum pump
- Connect vacuum pump MKM-667 (component side) to:
Vacuum pump
- Engine running at idle speed
|
Indicates the vacuum pump a value between -70 kPa ( -0.7 bar ) and -100 kPa ( -1 bar )?
|
|
|
|
T002
|
Check: Vacuum Supply System
|
- Ignition OFF
- Connect vacuum hose to:
Vacuum pump
- Disconnect vacuum hose from following component:
Vacuum Actuator - Swirl Level Control Valve
- Connect vacuum pump MKM-667 (component side) to:
Vacuum Actuator - Swirl Level Control Valve
- Use vacuum pump MKM-667 to create a vacuum in the range between -70 kPa ( -0.7 bar ) and -100 kPa ( -1 bar ).
|
Is no pressure decrease detectable?
|
|
|
|
T003
|
Check: Vacuum Supply System
|
- Disconnect vacuum hose from following component:
Vacuum Actuator - Boost Pressure Control Valve
- Connect vacuum pump MKM-667 (component side) to:
Vacuum Actuator - Boost Pressure Control Valve
- Use vacuum pump MKM-667 to create a vacuum in the range between -70 kPa ( -0.7 bar ) and -100 kPa ( -1 bar ).
|
Is no pressure decrease detectable?
|
|
|
|
T004
|
Check: Vacuum Supply System
|
- Close the following vacuum connection tightly (hose side)
Vacuum Actuator - Swirl Level Control Valve
- Connect vacuum pump MKM-667 (hose side) to:
Vacuum Actuator - Boost Pressure Control Valve
- Start engine
- Increase engine speed to 3500 rpm
|
Indicates the vacuum pump a value between -50 kPa ( -0.5 bar ) and -100 kPa ( -1 bar )?
|
|
|
|
T005
|
Check: Vacuum Supply System
|
- Ignition OFF
- Close the following vacuum connection tightly (hose side)
Vacuum Actuator - Boost Pressure Control Valve
- Connect vacuum pump MKM-667 (hose side) to:
Vacuum Actuator - Swirl Level Control Valve
- Engine idling
|
Indicates the vacuum pump a value between -70 kPa ( -0.7 bar ) and -100 kPa ( -1 bar )?
|
|
|
