Pressure Chamber Pressure Sensor, Replace
Remove
2. |
Place collecting basin underneath.
|
3. |
Unscrew rail pressure sensor (1) from pressure chamber
• |
Disconnect wiring harness connector.
|
|
|
|
Install
4. |
Tighten rail pressure sensor
• |
Fix wiring harness plug
|
|
Important: Wear protective
goggles
|
5. |
Carry out leak test on high pressure system
Note: Engine must be at
operating temperature
• |
Carry out actuator test (fuel leak)
|
• |
Visual inspection of high pressure system for fuel leak
|
|
|