vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Pressure Chamber Pressure Sensor, Replace > < Accumulator, Remove and Install

Replace pressure regulator

Important:   When working on the fuel system it is essential to pay attention to cleanliness as even the smallest dirt particles can lead to faults in engine operation or in the fuel system. Open fuel connections must be sealed with appropriate plugs from the Opel Parts Catalogue (catalogue number: 45 06 154 / part number: 9201697). Sealing plugs are only intended to be used once.

  Remove

1.   Open bonnet
2.   Disconnect battery
•   Detach earth connection from earth terminal
3.   Remove pressure regulator (1)
Note:   Before dismantling, the high pressure pump must be cleaned in the area of the pressure regulator
•   Disconnect wiring harness connector.
•   Unscrew 3 bolts
Object Number: 2412675  Size: DEFAULT


  Install

4.   Install pressure regulator
•   Replace 2x seal rings
•   Tighten 3x bolts
•   Fix wiring harness plug
5.   Connect battery
•   Attach earth connection to earth terminal
6.   Program volatile memories
7.   Close bonnet

Pressure Chamber Pressure Sensor, Replace > < Accumulator, Remove and Install