|
Test
|
Work Order Description
|
Nominal Value
|
|
T001
|
Tester Display Read ECU Identification
|
- Ignition ON
- Press corresponding key in the system main menu to call up Additional Functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
Displayed value okay?
|
Concerned Terminals:
-
|
|
|
|
T002
|
Tester Display Display Immobiliser Status
|
- Ignition ON
- Press corresponding key in the system main menu to call up Additional Functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
- Check the following parameters for correct status:
|
|
- Immobiliser function programmed.
|
YES
|
|
|
INACTIVE
|
Concerned Terminals:
-
|
|
|
|
T003
|
Tester Display Engine Oil Status
|
- Ignition ON
- Press corresponding key in the system main menu to call up Additional Functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
Note:
This Additional Function can be used to show various different system specific data to determine the condition of the engine oil.
The given nominal values are only valid if the service interval has just been reset.
It is possible that the actual values change between the service inspections.
|
100 %
or
INACTIVE
|
Concerned Terminals:
-
|
|
|
|
T004
|
Tester Display Read Odometer Value
|
- Ignition ON
- Press corresponding key in the system main menu to call up Additional Functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
Displayed value okay?
|
Concerned Terminals:
-
|
|
|
