vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Fuel Pressure, Check > < Replace camshaft sensor

Replace atmospheric pressure sensor

1.   Open bonnet
2.   Raise vehicle by its full height
3.   Detach charge air pipe (2)
•   Undo 2x clamps (1)
•   Remove charge air pipe
Object Number: 3446514  Size: DEFAULT


4.   Detach wiring harness plug from engine control unit
•   Release 2x wiring harness plugs (1) and disconnect
Object Number: 3446622  Size: DEFAULT


5.   Remove atmospheric pressure sensor (2)
•   Disconnect wiring harness connector (3)
•   Unscrew bolt (1)
Object Number: 3446639  Size: DEFAULT


  Install

6.   Install atmospheric pressure sensor
•   Tighten bolt
•   Fix wiring harness plug
7.   Connect 2x wiring harness plugs to engine control unit
8.   Install charge air hose with charge air pipe
•   Attach 2x clamps
9.   Close bonnet

Fuel Pressure, Check > < Replace camshaft sensor