Vauxhall Workshop Service and Repair Manuals > Astra H > J Engine and Engine Aggregates | Fuel Injection Systems | Simtec 75 | Repair Instructions

Camshaft Sensors, Replace

Remove

1.	Open bonnet

Remove camshaft sensor of intake camshaft (2)

•	Disconnect wiring harness plug (1)

•	Unscrew bolt

Remove camshaft sensor of exhaust camshaft (4)

•	Disconnect wiring harness connector (3)

•	Unclip wiring harness of mixture regulator oxygen sensor from bracket

•	Unscrew bolt

Install

Install camshaft sensor of exhaust camshaft

•	Tighten bolt 6 Nm

•	Clip on wiring harness of mixture regulator oxygen sensor to bracket

•	Fix wiring harness plug

Install camshaft sensor, intake camshaft

•	Tighten bolt 6 Nm

•	Fix wiring harness plug

6.	Close bonnet

Vauxhall Workshop Service and Repair Manuals