|
Check transmission fluid pressure (AF22)
(mechanical)
Important: During
full load test, apply hand brake and depress foot brake. Do not
test for longer than 5 seconds because of the risk of overheating
at full load. Take a pause to allow cooling. The transmission fluid
level must be correct. Only main pressure is checked.
 Remove
| 1. |
Remove battery support
|
| 2. |
Attach fluid pressure gauge KM-498-B
(1) with adapter KM-982 (2)
|
|
|
| 3. |
Install battery.
| • |
Install battery support
|
|
| 4. |
Check main pressure
| • |
Test values, see test instructions
|
|
| 5. |
Remove battery support
|
| 6. |
Remove fluid pressure gauge KM-498-B
with adapter KM-892
|
Install
| 7. |
Install plug (1) with new O-ring
|
|
|
| 8. |
Install battery.
| • |
Install battery support
|
|
| 9. |
Check transmission fluid level 
|
| 10. |
Program volatile memories
|
|
