The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Trouble Codes
- If any of the following trouble codes with status PRESENT or NOT PRESENT are stored, perform the related actions.
- With trouble code P1780, P1895, P1896 recognised:
- Select the following Functional System on the diagnostic tester:
Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
Trouble Codes
Function Checks
Data List
- Check the following data list parameters:
-
-
-
-
-
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|