|
Axle Shaft Seal Rings (F13/F13+/F17+/F13 MTA/F17+
MTA/F23)
 Remove
| 1. |
Detach lower engine cover
Note: If present.
|
| 2. |
Remove axle shaft affected from transmission 
Note: Place collecting
pan underneath - transmission fluid will escape
Axle shaft remains in wheel hub.
|
| 3. |
Remove intermediate shaft
Note: Only if right
axle shaft seal ring is affected and right intermediate shaft is
fitted.
|
| 4. |
Remove affected axle shaft seal ring with KM-557-1 (2) and KM-557-2
(1) from transmission housing
|
|
|
Install
| 5. |
Install new axle shaft seal ring
| • |
Coat axle shaft seal ring with transmission fluid
|
| • |
Install axle shaft seal ring flush in the transmission
|
For F13/F13 MTA with:
|
KM-446 (1)
|
|
For F17+/F17+ MTA with:
|
KM-446
|
|
For F23 with:
|
KM-519.
|
|
|
|
|
| 6. |
Install intermediate shaft
Note: If present.
|
| 7. |
Install axle shaft in the transmission
|
| 8. |
Check transmission fluid level
|
| 9. |
Attach lower engine cover
Note: If present.
|
|
