|
Adjustment Specification, Tapered Roller Bearing,
Differential (F17+/F17+ MTA)
Note: Adjust bearing
pre-tension by screwing in bearing race.
 Remove
| 1. |
Check breakaway torque
| • |
up to MY 2007.5: with MKM-536-A (1)
and KM-6037 (2)
|
| • |
from MY 2008: with MKM-536-A (1) and
DT-49113
|
Important: Adhere to specified
breakaway torques
|
| • |
Test rpm 1 revolution per second
|
Repair case
|
Breakaway torque with transmission dismantled
(Nm)
|
|
1)
|
Adjust to marking.
Re-use all the dismantled parts.
|
Align bearing race with marking
|
|
2)
|
Re-use bearing, replacement of bearing race, bearing flange,
differential or transmission housing.
|
0.60...1.00
|
|
3)
|
Bearing as new part
|
1.50...2.10
|
|
|
|
|
Install
| 2. |
Clean thread for retaining plate bolt in transmission
housing
|
| 3. |
Attach retaining plate for bearing ring
| • |
Tighten bolt 9 Nm
Note: Insert bolt with
locking compound
|
|
|
