Transmission case, replace (F13+/F13+ MTA)
Overview transmission case
Remove
|
2. |
Install transmission on KM-6115
(2)
|
3. |
Install transmission with KM-6115 on
KM-113-2 (1)
|
|
4. |
Move transmission to idle position
|
|
7. |
Remove central release (5)
|
8. |
Remove pressure line (4) and pressure line fastening sleeve
(3)
|
9. |
Remove bearing for main (2) and drive shaft (1) from
transmission case
|
|
10. |
Remove 2x axle shaft seal ring
|
11. |
Remove transmission case from KM-6115
|
Install
12. |
Install new transmission case on KM-6115
|
|
13. |
Install bearing for main (2) and drive shaft (1)
|
15. |
Install pressure line (4) and pressure line fastening sleeve
(3)
|
16. |
Install central release (5)
|
|
17. |
Install 2x axle shaft seal ring
|
|
18. |
Remove transmission with KM-6115 (2)
from KM-113-2 (1)
|
19. |
Remove transmission from KM-6115
|
|
|