Replace rear electronics module (REC) L35
Note: When replacing
the control unit, before removing the control unit carry out a
"Reset" using TECH2.
Remove
2. |
Remove side panel inner panelling
|
3. |
Remove rear electronics module (REC)
• |
Detach 6x cable wiring harness (1) at front
|
• |
Detach rear wiring harness plug
|
• |
Remove rear electronics module (REC)
|
|
|
|
Install
4. |
Install rear electronics module (REC)
Note: The rear
electronics module (REC) contains the maximum number of relays and
fuses. The rear electronics module will contain surplus relays and
fuses.
• |
Connect rear wiring harness plug
|
• |
Insert rear electronics module (REC)
|
• |
Connect 6x wiring harness plug at front
|
|
5. |
Install side panel interior panelling
|
7. |
Program volatile memories
Note: When replacing
the control unit, before removing the control unit carry out a
"Reset" using TECH2.
|
|