Rear Electronics Module (REC), Replace L08
Note: When replacing
the control unit, before removing the control unit carry out a
"Reset" using TECH2.
Remove
4. |
Release rear electronics module (REC)
• |
Disconnect 7x wiring harness plug (1)
|
|
|
|
5. |
Remove rear electronics module (REC)
• |
For vehicles with park pilot, unclip PAS control unit (1) at
the rear
|
|
|
|
Install
6. |
Insert rear electronics module (REC)
• |
For vehicles with park pilot, unclip PAS control unit at the
rear
|
|
7. |
Attach rear electronics module (REC)
• |
Connect 7x wiring harness plug
|
|
10. |
Program volatile memories
Note: When replacing
the control unit, before removing the control unit carry out a
"Reset" using TECH2.
|
|