vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Combined Tail Light / Lamp Holder (Circuit Board), Replace L35/L70 > < Glove box lamp (rear electronic module)

Astra H

Fully replace combined tail light L48

  Remove

1.   Open service flap.
2.   Remove rear lamp
•   Unscrew 2x wing nut (1)
•   Disconnect wiring harness plug (2)
3.   Remove lamp holder
•   Remove lamp holder
– Unlock 3x lamp holder (3)
4.   Remove bulb
Object Number: 3446374 Size: DEFAULT


  Install

5.   Insert bulb
6.   Attach lamp holder
•   Clip bulb holder in position
Important:   Before fitting the tail light, check that the tail light gasket is seated correctly.
7.   Attach gasket (1)
Note:   The gaskets (2) and (3) fit only in the intended positions due to their shape.
Object Number: 10678877 Size: DEFAULT


8.   Install tail light
•   Connect wiring harness plug
•   Tighten 2x wing nut
9.   Close service flap

Combined Tail Light / Lamp Holder (Circuit Board), Replace L35/L70 > < Glove box lamp (rear electronic module)