vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Replace steering lock and ignition lock assembly (Open and Start) > < Replace lock cylinder for steering and ignition lock

Actuation Lever - Signal Switch / Wiper Switch - Replace

Note:   The wiper stalk switch is replaced in a similar manner.

  Remove

1.   Remove actuating lever
•   Draw rubber sleeve out of the steering column panelling
•   Unclip retaining lug
Note:   Unlock engaging lug with a suitable tool (1), a hex screwdriver 1.5 mm WAF
•   Remove actuating lever
Object Number: 8125763  Size: DEFAULT


  Install

2.   Install actuating lever
•   Engage actuating lever
•   Install rubber sleeve in steering column panelling

Replace steering lock and ignition lock assembly (Open and Start) > < Replace lock cylinder for steering and ignition lock