vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Rear Wiring Harness, Replace L08 > < Wiring Harness for Alternator and Starter, Replace

Rear Wiring Harness, Replace L35

Important:   Replace or repair wiring harnesses observing the safety regulations of electrics/electronics.

  Remove

1.   Disconnect battery.
2.   Remove inner panelling, side panel, both sides LUREF_1.gif
3.   Remove moulded headlining
  • Vehicles with movable rear seats LUREF_1.gif
  • Vehicles without movable rear seats LUREF_1.gif
4.   Remove instrument panel padding LUREF_1.gif
5.   Remove carpet
  • Vehicles with movable rear seats LUREF_1.gif
  • Vehicles without movable rear seats LUREF_1.gif
6.   Remove engine compartment electronics module (FZM) LUREF_1.gif
7.   Remove bulkhead closure plate LUREF_1.gif
Note:   Applicable to LHD vehicles only.


8.   Overview of rear wiring harness RHD
Note:   Applicable to vehicles without rear electronics module (REC).
Note:   The illustration shows the vehicle without attaching parts for a clearer representation.



9.   Overview of rear wiring harness LHD
Note:   Applicable to vehicles without rear electronics module (REC).
Note:   The illustration shows the vehicle without attaching parts for a clearer representation.



10.   Overview of rear wiring harness RHD
Note:   Applicable to vehicles with rear electronics module (REC).
Note:   The illustration shows the vehicle without attaching parts for a clearer representation.



11.   Overview of rear wiring harness LHD
Note:   Applicable to vehicles with rear electronics module (REC).
Note:   The illustration shows the vehicle without attaching parts for a clearer representation.

  Install

12.   Install rear wiring harness
13.   Install bulkhead closure plate LUREF_1.gif
Note:   Applicable to LHD vehicles only.
14.   Fit engine compartment electronics module (FZM) LUREF_1.gif
15.   Install moulded headlining
  • Vehicles with movable rear seats LUREF_1.gif
  • Vehicles without movable rear seats LUREF_1.gif
16.   Fit carpet base
  • Vehicles with movable rear seats LUREF_1.gif
  • Vehicles without movable rear seats LUREF_1.gif
17.   Install instrument panel padding LUREF_1.gif
18.   Install inner panelling, side panel, both sides LUREF_1.gif
19.   Connect battery.
20.   Program volatile memories

Rear Wiring Harness, Replace L08 > < Wiring Harness for Alternator and Starter, Replace