Air Cleaner Element Replacement
Removal Procedure
2. |
Unclip the mass airflow wiring
harness from the air cleaner assembly. |
4. |
Remove the mass airflow sensor
(5) out of the air cleaner assembly and hang aside. |
|
Note: The 6 bolts (2)
can not be removed of the air cleaner assembly cover (3).
|
5. |
Loosen the 6 bolt (2) and
leave them in the air cleaner assembly cover (3). |
6. |
Remove the air cleaner
assembly cover (3). |
7. |
Remove the air cleaner element
(1). |
Installation Procedure
1. |
Install a NEW air filter
element (1). |
2. |
Install the air cleaner
assembly cover (3). |
3. |
Fasten the 6 bolt (2).
|
4. |
Install the mass airflow
sensor (5) to the air cleaner assembly. |
5. |
Fasten the clamp (4) to
3.5 N·m (31 lb in) . |
6. |
Install the mass airflow
wiring harness to the air cleaner assembly. |
|