Callout
|
Component Name
|
Preliminary Procedures
|
1. |
Turn the engine off and apply the brake pedal
several times until the brake pedal becomes firm to deplete the
vacuum reserve. |
|
4. |
Loosen the 3 charge air cooler outlet air hose
bolts from the throttle body and the charge air cooler outlet air
hose bracket bolt and hang the hose aside. |
|
5. |
Disconnect the engine coolant temperature sensor
wiring harness plug. |
|
1
|
Vacuum Pump Pipe
Procedure
Remove the vacuum pump pipe from the vacuum pump assembly and hang
aside.
|
2
|
Vacuum Pump Assembly Bolt (Qty: 4)
Caution: Refer to
Fastener Caution .
Tighten the 4 NEW vacuum pump assembly bolts in two passes:
Tighten
• |
First pass - 5 N·m (44
lb in) |
Special Tools
EN-45059 Torque Angle Sensor .
For equivalent regional tools, refer to
Special Tools .
|
3
|
Vacuum Pump Assembly
|
4
|
Vacuum Pump Assembly Gasket
Procedure
Install a NEW vacuum pump assembly gasket.
|