Engine Oil Cooler Inlet Pipe Replacement (1.4L LUH, LUJ)
Removal Procedure
4. |
Remove the turbocharger
coolant return pipe hose clamp (3). |
5. |
Remove the turbocharger
coolant return pipe hose (2) from the engine oil cooler inlet
pipe. |
|
Note: Do not move the
turbocharger coolant return pipe too much. An excessive moving of
the turbocharger coolant return pipe could cause leakage.
|
6. |
Remove the turbocharger
coolant return pipe bolt (1). |
7. |
Remove the engine oil cooler
bolt (1). |
8. |
Remove the engine oil cooler
inlet pipe bolt (4). |
9. |
Remove the engine oil cooler
inlet pipe (2) and the seal ring (3). |
Installation Procedure
1. |
Install the engine oil cooler
inlet pipe (2) in compound with a NEW seal ring (3). |
2. |
Install the engine oil cooler
bolt (1). |
3. |
Install the engine oil cooler
inlet pipe bolt (4) and tighten to 10 N·m (89 lb
in) . |
4. |
Tighten the engine oil cooler
bolt (1) to 20 N·m (15 lb ft) .
|
5. |
Install the turbocharger
coolant return pipe hose (2) to the engine oil cooler inlet
pipe. |
6. |
Install the turbocharger
coolant return pipe hose clamp (3). |
7. |
Install turbocharger coolant
return pipe bolt (1) and tighten to 10 N·m (89 lb
in) . |
|