Astra J
Generator and Air Conditioning Compressor Belt ReplacementSpecial ToolsEN-6130 Fixing PinFor equivalent regional tools refer to Special Tools . Removal Procedure
|
1. | Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . |
2. | If equipped, remove the engine shield. Refer to Engine Shield Replacement . |
3. | If equipped, remove the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement . |
4. | If equipped, remove the front compartment insulator. Refer to Front Compartment Insulator Replacement . |
5. | Tension the drive belt tensioner (2). |
5.1 | Install a wrench (3) to the tensioner bolt. |
5.2 | Push the drive belt tensioner clockwise until the EN-6130 fixing pin (1) can be installed to the bore. |
6. | Remove the generator and air conditioning compressor belt (1). |
Installation Procedure
1. | Install the generator and air conditioning compressor belt (1). |
2. | Tension the drive belt tensioner (2). |
2.1 | Install a wrench (3) to the tensioner bolt. |
2.2 | Push the drive belt tensioner clockwise until the EN-6130 fixing pin (1) can be removed from the bore. |
2.3 | Release the drive belt tensioner. |
3. | If equipped, install the front compartment insulator. Refer to Front Compartment Insulator Replacement . |
4. | If equipped, install the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement . |
5. | If equipped, install the engine shield. Refer to Engine Shield Replacement . |
6. | Lower the vehicle. |