vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Timing Belt Idler Pulley Replacement > < Camshaft Replacement - 1.6L LDE, LXV, and 1.8L 2H0

Oil Pressure Relief Valve Replacement

Removal Procedure

1. Remove the oil pan. Refer to Oil Pan Replacement .

           2028017



2. Remove the oil pressure relief valve closure bolt (1).
3. Remove the oil pressure relief valve assembly (2).
4. Remove the piston (3) and the spring (4).
Warning: Bodily injury may occur if the cleaning solvent is inhaled or exposed to the skin.


Warning: To avoid eye injury, use approved safety lenses, goggles, or face shield when using buffing and cleaning equipment.


5. Clean the parts.
6. Inspect the parts.
7. Clean the thread.

Installation Procedure


           2028017



1. Install the piston (3) and the spring (4).
2. Install the oil pressure relief valve assembly (2).

Caution: Refer to Fastener Caution .

3. Install the oil pressure relief valve closure bolt (1) and tighten to 21 N·m (16 lb ft) .
4. Install the oil pan. Refer to Oil Pan Replacement .

Timing Belt Idler Pulley Replacement > < Camshaft Replacement - 1.6L LDE, LXV, and 1.8L 2H0