Crankshaft Rear Oil Seal Installation
Special Tools
EN-658 Oil Seal Installer
For equivalent regional tools, refer to
Special Tools .
|
Caution: Clean the crankshaft sealing surface with a clean,
lint-free towel. Inspect lead-in edge of crankshaft for burrs/sharp
edges that could damage the rear main oil seal. Remove burrs/sharp
edges with crocus cloth before proceeding. |
1. |
Install EN-658-2
installer (2) to the crankshaft journal. |
2. |
Slide the NEW crankshaft rear
oil seal (1) onto EN-658-2 installer . |
3. |
Install the crankshaft rear
oil seal, using the EN-658-1 installer (1)
|
|