Fuel Injection Pump Drive Pulley Installation
Special Tools
EN-6603 Bracket
For equivalent regional tools, refer to
Special Tools .
|
Note: The notch in
the fuel injection pump drive pulley and the cam (1) must
align.
|
1. |
Install the fuel injection
pump drive pulley (2). |
2. |
Install EN-6603
bracket in order to fix the fuel injection pump drive
pulley. The bracket (1) must support to the crankshaft pulley as
shown (2). |
3. |
Install the fuel injection
pump drive pulley nut and tighten to 69 N·m (51 lb
ft) while holding up the fuel injection pump drive
pulley. |
|