vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Drive Belt Tensioner Removal > < Fuel Injection Pump Drive Pulley Installation

Oil Pump Drive Shaft Gear Installation


           2189516


1. Install the oil pump gear (1).
2. Install the oil pump gear nut (2).

Caution: Refer to Fastener Caution .


           2189442


3. Tighten the oil pump gear nut while holding up the oil pump gear (1) with a socket wrench (2) in the following order :
  3.1 Tighten the oil pump gear nut to 60 N·m (44 lb ft) .
  3.2 Wait for 60 seconds .
  3.3 Loosen the oil pump gear nut.
  3.4 Tighten the oil pump gear nut again to 60 N·m (44 lb ft) .

Drive Belt Tensioner Removal > < Fuel Injection Pump Drive Pulley Installation