vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Piston, Connecting Rod, and Bearing Replacement > < Crankshaft Rear Oil Seal Replacement

Crankshaft Front Oil Seal Replacement

Special Tools

•  EN-656   Installer
•  EN-45000   Seal Remover

For equivalent regional tools refer to Special Tools .

Removal Procedure

1. Remove the crankshaft pulley. Refer to Crankshaft Pulley Replacement .

           2192165



Note:  Do not damage sealing surfaces.
2. Remove the crankshaft front oil seal (1), using the EN-45000   remover .

Installation Procedure


           2189562



Note:  Drive the crankshaft front oil seal in as far as the stop with the EN-656   installer .
1. Install the crankshaft front oil seal in oil pump cover, using the EN-656   installer (1)
2. Install the crankshaft pulley. Refer to Crankshaft Pulley Replacement

Piston, Connecting Rod, and Bearing Replacement > < Crankshaft Rear Oil Seal Replacement