vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Relay Replacement - Within an Electrical Center > < Body Wiring Harness Replacement - Estate 35 - Right Hand Drive

Ignition Lock Cylinder Replacement

Removal Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement .

           874786



3. Insert the key into the ignition lock cylinder and turn the key to the RUN position.

           1866542



4. Depress the retainer through the lock housing access hole (1) with a small Allen wrench or similar pick-type tool.
5. Remove the ignition lock cylinder from the lock housing.

Installation Procedure


           874786



1. Turn the key to the RUN position and insert ignition lock cylinder into the lock housing.
2. Turn the key to the LOCK position and remove the key from the ignition lock cylinder.
3. Install the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement .
4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .

Relay Replacement - Within an Electrical Center > < Body Wiring Harness Replacement - Estate 35 - Right Hand Drive