Special Service Tools

SPECIAL SERVICE TOOLS

KM-108               Remover/Installer

KM-128-A           Tension Gauge

       To check V-belt tension

KM-210-A           Wheel Puller

       To pull off steering wheel

KM-354-B           Pressure Gauge

To check fluid pressure of power steering

KM-472               Wrench

To loosen and tighten hex lock nut in conjunction with commercially available torque wrench with ratchet handle, effective range 0-200 Nm/0-147.5 lbf. ft.

KM-473               Installing Tube

To drive retaining ring into steering gear

KM-476               Measuring Device

To check straight ahead position of steering gear

KM-507-B           Ball Joint Remover

To press tie rod joint out of steering arm

KM-J-22610        Installer

To tension retaining strap of bellows

KM-583               Adapter

To remove and install snap ring from steering spindle (in conjunction with KM-J-23653-A) (steering column with "steering wheel height adjustment")

KM-584               Remover/Installer

To remove and install pressure spring for height adjustment (steering column with "steering wheel height adjustment")

KM-585               Remover

To pull fulcrum bearing pins out of bearing housing (steering column with "steering wheel height adjustment")