To loosen and tighten hex lock nut in conjunction
with commercially available torque wrench with ratchet handle, effective
range 0-200 Nm/0-147.5 lbf. ft.
KM-473 Installing Tube
To drive retaining ring into steering gear
KM-476 Measuring Device
To check straight ahead position of steering gear
KM-507-B Ball Joint Remover
To press tie rod joint out of steering arm
KM-J-22610 Installer
To tension retaining strap of bellows
KM-583 Adapter
To remove and install snap ring from steering
spindle (in conjunction with KM-J-23653-A) (steering column with
"steering wheel height adjustment")
KM-584 Remover/Installer
To remove and install pressure spring for height
adjustment (steering column with "steering wheel height
adjustment")
KM-585 Remover
To pull fulcrum bearing pins out of bearing housing
(steering column with "steering wheel height adjustment")