vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Stabilizer and Rubber Parts|Specifications > < Rear shock absorber - leakage

Corsa B

 

Stabiliser, Remove and Install  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove one rear wheel. Remove stabiliser fastenings on rear axle body. Remove stabiliser with damper sideways from the rear axle body (see illus.).  

If necessary, remove opposite rear wheel and drive out stabiliser with drift.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Object Number: 2382234 Size: DEFAULT

For easier installation, coat stabiliser thinly with lubricant. Insert stabiliser in rear axle body and damper and install with new fastening bolts (see illus.). Attach rear wheel.  

Object Number: 616200 Size: DEFAULT  Torque - Angle Method   

Stabiliser to rear axle  

- 60 Nm / 44 lbf. ft. + 60 ° + 15 °  

Wheel to wheel hub  

- 110 Nm / 81 lbf. ft.  

 

Object Number: 2385186 Size: DEFAULT

Stabilizer and Rubber Parts|Specifications > < Rear shock absorber - leakage