· The voltage level
recognized by control unit at the relevant control unit output is Low (less
than 0.1 V), although control unit output was set at High (12 V;2-3 shift
solenoid valve is not actuated)
(short circuit to ground, Ter. 31)
· With ignition ON the
fault is immediately recognized.
· If the fault appears
after the engine is started, it is only recognized after the solenoid valve
is actuated.
If trouble code 26 was
recognized, shifting can still be made manually (emergency program) to the
following gears at the individual driving speeds:
Automatic Transmission AF
14/20:
"Driving stage"
(gear): "D" (4), "3" (3), "2" (3),
"1" (1)
Automatic Transmission AF
13/22:
"Driving stage"
(gear): "D" (4), "3" (4), "2" (3),
"1" (1)
|