|
Sill Panelling - Rear, Replace - Model F 68
 Remove
| 2. |
Cut away rear sill panelling
Note: Observe size of
new part!
|
Install
|
| 3. |
Adjust rear sill panelling and fit
|
| 4. |
Prepare flange
| • |
Apply spot-welding paint
|
|
Important: Apply weldable
adhesive in the area of the wheel housing! Comply with body repair
instructions using adhesive and welding! 
|
| 5. |
Weld in new part
|
| 7. |
Apply underseal to underside
Note: Corrosion
Protection Measures in Mass-Production
|
|
|
