|
Load Compartment Cover – Side, Remove and
Install (Model F 68)
 Remove
| 1. |
Remove load compartment cover 
|
| 2. |
Fold rear seat backrest forwards
|
| 3. |
Remove C/D-pillar inner panelling
|
| 4. |
Remove lock striker, rear seat backrest
|
| 5. |
Remove inner panelling of lower rear end panel
|
| 6. |
Remove sill inner panelling
|
| 7. |
Unlatch and disconnect wiring harness plug load/luggage
compartment light
|
| 8. |
Unlatch and disconnect wiring harness plug, speaker
|
| 9. |
Unthread rear seat belt (1) from load compartment cover (2)
|
| 10. |
Remove side load compartment cover
|
|
|
Install
| 11. |
Install side load compartment cover
|
| 12. |
Thread rear seat belt into load compartment cover
|
| 13. |
Connect wiring harness plug for speaker
|
| 14. |
Install wiring harness plug load/luggage compartment light
|
| 15. |
Install sill inner panelling
|
| 16. |
Install inner panelling for lower rear end panel
|
| 17. |
Install lock striker, rear seat backrest
|
| 18. |
Install C/D-pillar inner panelling
|
| 19. |
Fold rear seat backrest backwards
|
| 20. |
Install load compartment cover
|
| 21. |
Check function of rear seat backrest lock
|
|
