Seat Belt, Front, Remove and Install (Model F08
& W5L)
Remove
1. |
Remove inner panelling, front of rear quarter panel (model F 08
& W5L)
|
|
2. |
Detach guide fitting (1) from height adjuster
|
3. |
Detach upper belt guidance system (2) from B-pillar
|
4. |
Detach reel retractor (3) from B-pillar
|
5. |
Detach seat belt from underbody at the side (4)
|
6. |
Remove front seat belt
|
|
Install
7. |
Ensure correct seating lower belt guidance system (1)
Note: Damaged belt
guidance systems must be replaced.
|
8. |
Attach seat belt to underbody at the side 35 Nm
|
9. |
Attach reel retractor to B-pillar
|
10. |
Attach upper belt guidance system to B-pillar
|
11. |
Attach guide fitting to height adjuster
|
|
|
12. |
Install inner panelling, front of rear quarter panel (model F
08 & W5L)
|
|