|
Actuating Cable, Replace
Note: Damaged
actuating cables are always replaced in pairs by Aftersales. The
Aftersales department maintains the actuating cables in the
delivery programme.
 Remove
| 4. |
Remove electric drive assembly 
Note: For vehicles with
extras - sliding electric sunroof
|
| 5. |
Remove sliding block assembly
Note: Push sliding
block assembly out of actuation unit until the rear guide emerges
from the actuation unit.
|
| 6. |
Unclip actuation cable (2) from the rear guide (1) and pull
complete actuation cable out of actuation unit
|
|
|
Install
| 7. |
Install actuation cable
| • |
Clip actuation cable into rear guide
|
|
| 9. |
Perform basic adjustment of both control cables
|
| 11. |
Install actuation unit
|
| 12. |
Install electric drive assembly
Note: For vehicles with
extras - sliding electric sunroof
|
| 13. |
Install sliding block assembly
|
|
