vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Cylinder Head Housing > < Sheathed Glow Plugs, Replace (Z 17 DTH, with Air Conditioning, LHD)

Corsa C

Heating System Control Unit, Replace (Z 17 DTH)

  Remove

1.   Open bonnet
Important:   On vehicles with ESP - the steering angle sensor loses its basic adjustment each time the battery is disconnected. It must be recalibrated
2.   Remove battery
•   Remove ground cable (1)
•   Disconnect positive cable (2)
•   Remove relay box
•   Remove battery bracket
– Remove bolt (3)
Object Number: 2406532 Size: DEFAULT


3.   Remove fuel filter housing from bracket
•   Disconnect wiring harness plug (1)
Object Number: 2406912 Size: DEFAULT


4.   Remove battery support
•   Unscrew 4x bolt (1)
Object Number: 2406539 Size: DEFAULT


5.   Detach heating system control unit
•   Unclip heating system control unit in direction of arrow
•   Disconnect wiring harness plug
Object Number: 2406519 Size: DEFAULT


  Install

6.   Attach heating system control unit
•   Connect wiring harness plug
•   Clip in heating system control unit
7.   Install battery support
•   Tighten 4 bolts
8.   Attach fuel filter housing
•   Connect wiring harness plug
9.   Install battery
•   Attach battery bracket
•   Tighten bolt
•   Attach relay box
•   Attach positive cable
•   Connect ground cable.
10.   Close bonnet
11.   Program volatile memory

Cylinder Head Housing > < Sheathed Glow Plugs, Replace (Z 17 DTH, with Air Conditioning, LHD)