|
Check engine oil pressure
 Remove
| 2. |
Disconnect oil pressure switch wiring harness plug (2)
|
| 3. |
Remove oil pressure switch (1)
| • |
Place collecting basin underneath.
|
|
|
|
| 4. |
Attach KM-498-B in combination with
KM-135
|
|
|
| 5. |
Check engine oil pressure
| • |
Start engine.
Note: Engine oil
pressure approx. 140 kPa (1.4 bar) at idling speed and with the
engine at operating temperature.
|
|
| 6. |
Detach KM-498-B in combination with
KM-135
|
| 7. |
Install oil pressure switch
| • |
Tighten oil pressure switch 32
Nm
|
|
| 8. |
Connect oil pressure switch wiring harness plug
|
| 9. |
Check engine oil level, if necessary correct.
| • |
Observe specified engine oil quantity
|
|
|
