vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Oil Filter Housing, Remove And Install (Z 17 DTH, With Air Conditioning, LHD) > < Sensor, Dynamic Oil Level Check, Replace

Oil Temperature, Measure (Z 17 DTH, with Air Conditioning, LHD)

1.   Open bonnet
2.   Remove oil dipstick
3.   Insert measuring probe
•   into oil dipstick guide tube until approx. 1 cm above bottom of oil pan
•   Seal opening of oil dipstick guide tube with accompanying rubber plug
4.   Measure oil temperature
•   Using MKM-596-A
Note:   The oil temperature depends on the engine load. High outside temperatures and extreme engine loads can cause the oil temperature to reach approx. 150°C.
5.   Remove measuring probe.
6.   Insert oil dipstick.
7.   Close bonnet
Object Number: 2413408  Size: DEFAULT


Oil Filter Housing, Remove And Install (Z 17 DTH, With Air Conditioning, LHD) > < Sensor, Dynamic Oil Level Check, Replace