vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Ribbed V-Belt Tensioner, Check (Z 17 DTH, with Air Conditioning, LHD) > < Ribbed V-belt

Corsa C

Ribbed V-Belt, Tensioner, Replace

  Remove

1.   Open bonnet
2.   Raise vehicle
3.   Remove lower engine compartment cover / splash protection
4.   Remove ribbed V-belt (1)
•   Tension ribbed V-belt tensioner in direction of arrow
•   Fit KM-6130 (2)
Note:   Mark running direction.
Object Number: 2406286 Size: DEFAULT


5.   Remove ribbed V-belt tensioner (1)
•   Tension ribbed V-belt tensioner.
•   Remove KM-6130
•   Remove bolt (2)
Object Number: 2406321 Size: DEFAULT


  Install

6.   Install ribbed V-belt tensioner
•   Tighten bolt 50 Nm
•   Tension ribbed V-belt tensioner.
•   Use KM-6130
7.   Install ribbed V-belt
Note:   Note running direction.
•   Release ribbed V-belt tensioner
– Remove KM-6130
8.   Install lower engine compartment cover / splash protection
9.   Lower vehicle
10.   Close bonnet

Ribbed V-Belt Tensioner, Check (Z 17 DTH, with Air Conditioning, LHD) > < Ribbed V-belt