Corsa C
Wheel Speed Sensor, Except Vectra-C/Signum and Astra-H
Note: This operation does not apply to Astra-H and Vectra-C/Signum. Objective: Operational check of the wheel sensor for vehicles with Anti-Blocking System. Measurement: Plot of voltage at the signal output of the speed sensors on the wheels. Preparation: Switch off the engine and ignition. Connections:
Procedure Tech 31:
The signal plot should be continuous and regular. If the plot of the signal varies from the plot shown below the sensor disc and sensor must be checked for soiling, concentricity and correct shape. When varying the wheel speed the frequency and the amplitude will change. Procedure Tech 32:
Setup File:
The signal plot should be continuous and regular. If the plot of the signal varies from the plot shown below the sensor disc and sensor must be checked for soiling, concentricity and correct shape. When varying the wheel speed the frequency and the amplitude will change. |
||||||||||||||||||||||||||||||||||||||||||