vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace rear reaction member (Z 10 XE, Z 10 XEP, with air conditioning, LHD) > < J338010 remove and install reaction member (rear) (Z 14 XE, Z 16 YNG with AC, RHD)

Corsa C

Front Reaction Member, Remove and Install (Z 14 XEP)

1.   Open bonnet
Important:   On vehicles as of model year 04 with ESP - the steering angle sensor loses its basic adjustment each time the battery is disconnected. It must be recalibrated.
2.   Disconnect battery
•   Detach ground cable
3.   Raise vehicle
4.   Remove front reaction member
•   Unscrew 2 bolts
•   Unscrew nut
– Remove bolt
Object Number: 2411109 Size: DEFAULT


5.   Install front reaction member
•   Tighten 2 bolts 95 Nm
•   Tighten nut 60 Nm
6.   Lower vehicle
7.   Connect battery
•   Connect ground cable.
8.   Program volatile memory
9.   Close bonnet

Replace rear reaction member (Z 10 XE, Z 10 XEP, with air conditioning, LHD) > < J338010 remove and install reaction member (rear) (Z 14 XE, Z 16 YNG with AC, RHD)