vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Check timing (Z 10 XE, Z 10 XEP, without air conditioning, LHD) > < Check compression (Z 10 XE, Z 10 XEP, with air conditioning system, LHD)

Corsa C

Measure oil temperature (Z 10 XE, Z 10 XEP)

  Remove

1.   Open bonnet
2.   Remove oil dipstick
3.   Insert measuring probe
•   Insert probe into oil dipstick guide tube until approx. 1 cm above bottom of oil pan
•   Seal opening of oil dipstick guide tube with accompanying rubber plug
4.   Measure oil temperature with KM-596-A
Note:   The oil temperature depends on the engine load. High outside temperatures and extreme engine loads can cause the oil temperature to reach approx. 150 °C.
Object Number: 2410527 Size: DEFAULT


5.   Remove measuring probe.

  Install

6.   Insert oil dipstick.
7.   Close bonnet

Check timing (Z 10 XE, Z 10 XEP, without air conditioning, LHD) > < Check compression (Z 10 XE, Z 10 XEP, with air conditioning system, LHD)