Oil Filter Short-Circuit Valve, Replace (Z 18 XE,
with Oil Filter Cartridge)
Remove
1. |
Disconnect crankshaft sensor wiring harness plug
|
2. |
Cut thread in bypass valve
• |
Using thread cutter M10 (1) - 2nd stage
|
• |
Using thread cutter M10 - 3rd stage
|
|
|
|
3. |
Remove bypass valve
Important: Carefully prise out
bypass valve
|
• |
Screw in bolt (M10)
|
|
Install
4. |
Install bypass valve
Important: Remove cuttings
|
• |
Carefully drive in to stop using journal (15 mm diameter)
|
|
5. |
Connect crankshaft sensor wiring harness plug
|
|