Vauxhall Workshop Service and Repair Manuals > Corsa C > J Engine and Engine Aggregates | Fuel Injection Systems | Denso DEC | Accelerator Pedal Position Sensor | Repair Instructions | Pedal Sensor, Replace (Z 17 DTH, with AC, LHD)

Pedal Sensor, Replace (Z 17 DTH, with AC, LHD)

Remove

1.	Open bonnet

Important: On vehicles with ESP - the steering angle sensor loses its basic adjustment each time the battery is disconnected. It must be recalibrated

Disconnect battery

•	Detach ground cable

Remove lower inner panelling/instrument panel padding on driver's side

•	Unscrew 2 bolts

•	Remove panelling

Remove lower centre inner panelling/instrument panel padding on driver's side

•	Unscrew 2 bolts

•	Remove panelling

Remove pedal sensor

•	Disconnect wiring harness plug (1)

•	Unscrew 3 nuts (2)

Install

Install pedal sensor

•	Tighten 3x nuts 9 Nm

•	Connect wiring harness plug

Install lower centre inner panelling/instrument panel padding on driver's side

•	Attach panelling

•	Screw in 2x bolt

Install lower inner panelling/instrument panel padding on driver's side

•	Attach panelling

•	Screw in 2x bolt

9.	Connect battery

10.	Close bonnet

11.	Program volatile memory

Vauxhall Workshop Service and Repair Manuals