vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Denso DEC|Specifications > < Air Intake Pipe, Replace (Z 17 DTH, with Air Conditioning, LHD)

Corsa C

Replacing atmospheric pressure sensor

  Remove

1.   Open bonnet
2.   Disconnect battery
•   Detach ground clamp from ground terminal
– Unscrew nut
3.   Raise vehicle all the way
4.   Remove atmospheric pressure sensor (1)
•   Disconnect wiring harness plug
•   Unclip atmospheric pressure sensor from bracket in direction of arrow
Object Number: 3447585 Size: DEFAULT


  Install

5.   Install atmospheric pressure sensor
•   Clip sensor into bracket
•   Connect wiring harness plug
6.   Lower vehicle all the way
7.   Connect battery
•   Attach ground clamp to ground terminal
– Tighten nuts
8.   Program volatile memory
9.   Close bonnet

Denso DEC|Specifications > < Air Intake Pipe, Replace (Z 17 DTH, with Air Conditioning, LHD)