vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace DIS ignition module (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD) > < Illustration - Air Cleaner Housing, Air Ducts Z 12 XE

Corsa C

Replace DIS ignition module (Z 10 XE, Z 10 XEP, without air conditioning, LHD)

  Remove

1.   Open bonnet
2.   Remove ignition module
•   Remove ignition module cover
– Move to the right
•   Disconnect wiring harness plug
•   Unscrew 2 bolts
•   Extract using KM-6009 (1)
Note:   Do not tilt
Object Number: 2410586 Size: DEFAULT


  Install

3.   Install ignition module
•   Tighten 2 bolts 8 Nm
•   Connect wiring harness plug
•   Fit ignition module cover
4.   Close bonnet

Replace DIS ignition module (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD) > < Illustration - Air Cleaner Housing, Air Ducts Z 12 XE